During the entry and exit delay time, you may decide that instead of having the system beep every second as it counts down, you would prefer to have only the beeps to occur during the last few seconds before the end of the countdown.
This final beep feature, when activated, will affect the gateway sounder and the indoor siren as well.
First you will need to disable the entry exit beeps during the delay countdown. Use the guide setting above and set the delay beep sounds to “off,” and set the entry/exit only final beeps to 3 to 10 seconds, depending on how many beeps you would like (one beep per second during the countdown).
Once the entry delay beeps are turned off, the settings should resemble the image below. When completed, the gateway and the indoor siren will only beep during the last few seconds at the end of the delay time, Based on the number of seconds set.
Confirmation beeps always occur when the gateway is armed and the delay timer has ended.
They also occur when the gateway is disarmed. The gateway will always deliver the confirmation beeps at a low volume and cannot be turned off or change the volume of the beeps. The indoor siren also is capable of providing the confirmation beeps.