This is a brief overview of the configurable settings of your system. Please reach out to the support team at support@goabode.com with any questions.
General Settings:
Motion Camera resolution - Sets the resolution of the camera
Motion Camera Grayscale - Toggle Black and White pictures for motion cameras (Only works on outdoor, now discontinued models)
Silence All Gateway Sounds - Will stop any sound coming from the gateway (Alarms included) *Good for testing*
Time Settings:
These are the delays when switching modes or entering the home, the only one required is Exit delay for Away or "Full Arm" (minimum 30 seconds).
Entry delay is when the Alarm is already in a specific mode and someone enters through an armed door. This will give them time to disarm before the alarm triggers.
Exit Delay is when you are switching modes, E.G. Standby to Armed, the exit delay gives you time to leave before the system and sensors are armed
Gateway Sound Settings:
Door chime settings - Sound level of chimes you have them enabled
Entry Delay Sound for Away - Sound level if you have an Entry Delay for Away arm
Exit Delay Sound for Away - Sound level for the Exit Delay sound
Entry Delay Sound for Home Arm - Sound level if you have an Entry Delay for Home arm
Exit Delay Sound for Home Arm - Sound level if you have an Exit Delay for Home arm
Confirm Sound Away Mode - Final Confirmation beep that your system has changed to Away arm
Confirm Sound Home Mode - Final Confirmation beep that your system has changed to Home arm
Confirm Sound Standby - Final Confirmation beep that your system has changed to Standby or been disarmed
Warning beep - Beep that occurs if something on the gateway is awry (We recommend keeping this disabled so as not to wake you up in the middle of the night) *abode Support team can help you diagnose any issues*
Entry Only Final Beep - This configures beeping of the Final seconds of your countdown timer. (E.G - 1 minute entry delay will only beep for the final 10 seconds)
Exit Only Final Beep - This configures beeping of the final seconds of your countdown timer. (E.G - 1 minute exit delay will only beep for the final 10 seconds)
Alarm Duration - Configure the amount of time the sirens will wail
System setting guide
