Articles in this section

See more

Outdoor Smart Camera

Avatar
Brian P
  • Updated

Related Articles

Doorbell Installation Guide     Standard Camera Installation Guide

Camera Overview

Outdoor Smart Camera (OSC) is designed to be used with the included DC-powered mount that allows the device to be used as an outdoor or indoor security camera. The OSC may also be used as a video doorbell that is designed for you to view and speak with the visitor at the door with a smartphone from anywhere. The built-in PIR sensor is designed to give a typical detection range of 5 meters and has 105∘degrees viewing angle to the front.

Parts Overview:

Screen_Shot_2020-09-21_at_5.58.32_PM.png

Screen_Shot_2020-09-21_at_5.59.44_PM.png

  1. Microphone
  2. Lens
  3. LED light ring
  4. PIR sensor
  5. Camera Body
  6. DC camera mount
  7. Magnetic mount
  8. AC doorbell mount

Power Supply:

The OSC uses 16-24V AC power or 5V DC power as its power source.

 

OSC LED Guide:

Color Behavior Meaning
Blue On Streaming to viewer(s)
Flash every 3 seconds OSC under Wi-Fi setup mode
Amber Flash every 3 Seconds Wi-Fi connectivity issue
ON for 3 seconds Finish warmup after powering on, entering normal operation
3 Flashes then ON for 6 seconds OSC was reset to factory settings
Blue/Amber Amber and Blue alternating Flashes every 3 seconds OSC is scanning for QR code under Wi-Fi setup mode

 

Adding the camera to your system:

A smartphone with the Abode App installed is required to perform setup. Search for the app in Google Play or Apple App Store, type “Abode” in the search bar, then download the application.

  1. Open the Abode app and login to your account
  2. Power up OSC using the Corded Attachment. Wait up to 30 seconds for the device to warm up. Warm-up is complete when the LEDs turn amber for 2 seconds.
  3. Navigate to your devices list and select “Add device” 
  4. Choose Outdoor Smart Camera. Follow in-app prompts to add the camera to your account. Camera LEDs will flash blue every 2 seconds during Wi-Fi setup or Alternating Amber/Blue when looking for a QR code. Once setup is successful the LEDs will turn green for 3 seconds.
  5. After successfully adding your OSC to your account the camera may be powered down and re-installed in desired location (doorbell or security camera) and re-powered. Video stream and recorded clips from the camera will be accessible on the Abode app Dashboard.

OSC as a Stand-Alone Device

You can use the OSC as standalone device which does not require an Abode Gateway or iota. A smartphone with the Abode App installed is required to perform setup. Search for the app in Google Play or Apple App Store to download the application.

  1. Open the Abode App and create your account
  2. Power up OSC using the Corded Attachment. Wait up to 30 seconds for the device to warm up. Warm-up is complete when the LEDs turn amber for 2 seconds.
  3. Choose to setup as standalone camera or navigate to devices list and select “Add device” 
  4. Choose Outdoor Smart Camera. Follow in-app prompts to add the camera to your account. Camera LEDs will flash blue every 2 seconds during Wi-Fi setup or alternating Amber/Blue when searching for a QR code. Once setup is successful the LEDs will turn green for 3 seconds.

After successfully adding your OSC to your account the camera may be powered down and re-installed in desired location (doorbell or security camera) and re-powered. Video stream and recorded clips from the camera will be accessible on the Abode App Dashboard.

 

** Please note: the OSC is not compatible with multi-chime setups **

Related articles