Outdoor Smart Camera (OSC) can be placed on a shelf (flat bottom) inside, or mounted indoors or outdoors with the included Magnet Mount. The camera may be powered by a 5V USB port or with the included AC wall adapter.
To get started you will need the Magnet Mount, packet with the screw and metal plate, drill and a Phillips head screwdriver.
Scroll down to follow these step-by-step instructions to help you with installation.
Plan Cable Path
Before installing, plan an ideal cable path. It’s recommended to mount the camera out of direct sunlight and under a shelter for the best image quality.
NOTE: Leave enough length to install and adjust the camera angle. Next Mount Wall Plate
Once your location has been set, use the included screw to mount the wall plate to a solid surface. Use a 3/32" (2.5mm) drill bit to drill a pilot hole for the screw.
NOTE: If mounting camera to drywall or masonry, use the included wall anchor and a 1/4" (6.5mm) drill bit to drill a pilot hole. Next Attach Magnet Mount
Rotate and lock the Magnet Mount to the installed wall plate. Ensure the mount is secure. Attach the back of the camera to the Magnet Mount and adjust the camera to the desired angle.
